Basic Info.

Product Description

fly ash consists of fine, powdery particles that are predominantly spherical in shape, either solid or hollow, and mostly glassy (amorphous) in nature. the carbonaceous material in fly ash is composed of angular particles. the particle size distribution of most bituminous coal fly ashes is generally similar to that of silt (less than a 0.075 mm or no. 200 sieve). although sub bituminous coal fly ashes are also silt-sized, they are generally slightly coarser than bituminous coal fly ashes. the specific gravity of fly ash usually ranges from 2.1 to 3.0, while its specific surface area (measured by the blaine air permeability method may range from 170 to 1000 m2/kg. the color of fly ash can vary from tan to gray to black, depending on the amount of unburned carbon in the ash. the lighter the color, the lower the carbon content. lignite or sub bituminous fly ashes are usually light tan to buff in color, indicating relatively low amounts of carbon as well as the presence of some lime or calcium. bituminous fly ashes are usually some shade of gray, with the lighter shades of gray generally indicating a higher quality of ash. the chemical properties of fly ash are influenced to a great extent by those of the coal burned and the techniques used for handling and storage. there are basically four types, or ranks, of coal, each of which varies in terms of its heating value, its chemical composition, ash content, and geological origin. the four types, or ranks, of coal are anthracite, bituminous, sub bituminous, and lignite. in addition to being handled in a dry, conditioned, or wet form, fly ash is also sometimes classified according to the type of coal from which the ash was derived. the principal components of bituminous coal fly ash are silica, alumina, iron oxide, and calcium, with varying amounts of carbon, as measured by the loss on ignition (loi). lignite and sub bituminous coal fly ashes are characterized by higher concentrations of calcium and magnesium oxide and reduced percentages of silica and iron oxide, as well as a lower carbon content, compared with bituminous coal fly ash. very little anthracite coal is burned in utility boilers, so there are only small amounts of anthracite coal fly ash.