Basic Info.

Product Description

a breakthrough in conventional system of sealing the c.i. pipe joint with lead. it would replace lead used for sealing pipe joints. worldwide, lead or cement mortar is used for sealing the pipe joints. in case of lead, heating is required for melting, gasket/wet clay shuttering support is required for horizontal joints and finally hammering is must for proper caulking. lead has negligible bonding strength, is toxic and pollutes the environment when heated. cement mortar decays with the reaction of acid (used for cleaning toilets), requires water curing, has a tendency to develop shrinkage cracks, has low bonding strength, is not very durable and joints are not completely waterproofed.

dripseal pjs-43 has been developed to overcome all these drawbacks. besides outstanding properties, low cost is plus point of this product. dripseal pjs-43 works out much economical than lead as its density (1.95gm/cc) is 1/6th that of lead (11.35gm/cc). it is also an import substitute as 50% of total lead consumption is imported into india.

salient features

• two pack system, which hardens on mixing
• being non flowable, it is easy to apply on horizontal pipe joints without shuttering support
• cures at room temperature with a setting time of 4 to 6 hours
• waterproof
• resistant to chemicals
• excellent bonding or hammering is not required
• doesn't shrink on setting
• withstand pressure higher than 20 kg / cm2 in water supply pipe line
• low labour cost as it is easy to apply
• prolonged service life
• non-polluting, toxic and environment friendly

mixing
it comes in two coloured packs, black (resin) and white (hardner). mix both parts homogeneously in the supplied proportion. in cold weather conditions, both unmixed packets may be placed under sun or heated to room temperature (25 oc) to make them more workable for mixing.

application

clean the pipe joint to make it free from dust, grease/oil, algae, mould growth, loose particulates, cement splashes and all other foreign matters and contaminants. ensure the pipe joint is dry. provide hamp yarn as usual in pipe joint as bakc filler. force the mixed compound into the gap of pipe joint with caulking tool / ms flat piece / hand. proper pressing of the compound is necessary to avoid air entrapment. for a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening. don't disturb the joint till the compound has hardened.